Industry & utilities
Production sites and utility buildings: safe maintenance of roofs and installations.
Enexis — Kolham
Drag the slider: where the roof edge was previously unprotected, a continuous guardrail now runs around the entire roof.
Permanent collective roof-edge protection was installed at the Enexis facility in Kolham. The before-and-after images show the result: where the roof edge was previously unprotected, a continuous collective fall-protection system now runs around the entire roof. The system allows safe maintenance of the roof and the solar panels.
Probo
Collective roof-edge protection was installed around the production roof at Probo. The roofs are largely covered with solar panels; the protection runs along the roof edges so the installation remains safely accessible for maintenance. The work was carried out in phases.
Agilent Technologies — Middelburg
At the Agilent Technologies technology complex in Middelburg, managed by CBRE | GWS EMEA, a total of 639 metres of roof-edge protection was installed across seven roof surfaces between January and March 2026. Alongside the guardrail, three caged ladders, one façade ladder and two crossover platforms were installed, making the roof fully accessible and demonstrably safe via fixed climbing provisions. The entire project is documented in a technical project dossier compliant with BBL §4.7.11, including a building-specific Eurocode calculation, with a ten-year warranty.
639 m¹
roof-edge protection
7
secured
3 + 1
caged & façade ladders
2
crossover platforms
Eurocode
technical project dossier
10 years
on the installation
Want your roof made safe too?
Book a no-obligation consultation about permanent roof edge protection for your building.